RENOVATOR UNDERCOAT & WALLBOARD SEALER

A Budget Undercoat & Gyprock Sealer Acrylic Ideal for Masonry Surfaces

Duralex RENOVATOR UNDERCOAT & WALLBOARD SEALER is a professional quality, fast drying, sandable undercoat for the preparation of a wide range of both interior and exterior surfaces. This acrylic undercoat can be overcoated with turps or water thinned top coats after two hours depending on weather and ventilation.

USES (Interior & Exterior)

For the preparation of interior timber, chipboard, plasterboard, cement render, brick, fibrous cement and previously painted surfaces prior to finishing with either water-based or oil-based topcoats.

COLOURS

Available in White only which is compatible with all major tinting systems. Tinter, if added, should be shaken and stirred in thoroughly immediately after addition. To obtain light tint colours use only one third to one half the normal amount of tinters.

For more detailed instructions ask for a product information sheet.

Specifications
Sizes	4 Litre, 6 Litre, 10 Litre and 20 Litre.
Coverage	A maximum coverage rate of 14m² per Litre per coat. This may fall below 10m² per Litre when painting corrugated, rough or absorbent surfaces.
Ventilation	Allow adequate ventilation when painting indoors during and after use to dissipate water vapour.
Clean Up	Wash all equipment with clean water. Any dried spots may be removed using methylated spirits.
IMPORTANT	Keep out of reach of children. To avoid spoilage of paint, keep container sealed when not in use.
Environment	Low odour. Low V.O.C. Environmentally friendly.